MOTORS & SHIELDS

DC Motor 12v 200rpm

KSh1,100.00

DC Motor 12v 200rpm .

Operating Voltage: 12V Speed: 200rpm Free running current: 30mA Stall Current: 0.65A Power: 8W Torque: 3.7kg-cm Motor Diameter: 24mm Motor Length: 66,75mm Gear Diameter: 25mm Shaft Diameter: 4mm Shaft Length: 12,5mm Weight: 82gr

Learn More

KSh1,100.00

  • Availability: 0 in stock
Quick View
Dc Motor 12v 300rpm

KSh1,100.00

Dc Motor 12v 300rpm .

300RPM 12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel. 

Learn More

KSh1,100.00

  • Availability: 0 in stock
Quick View
DC Motor 12v 60rpm

KSh1,100.00

DC Motor 12v 60rpm .

Operating Voltage: 12V Speed: 60rpm Free running current: 150mA Stall Torque: 2.2A Power: 26.5W Motor Diameter: 36mm Motor Length: 87mm Gear Diameter: 37mm Shaft Diameter: 6mm Shaft Length: 15mm Weight: 225gr

Learn More

KSh1,100.00

  • Availability: 0 in stock
Quick View
Dc Motor 12v Continous .

DC motors have two traits that make them easy to control for several applications.  The first is the relationship between voltage and speed, and the second is the relationship between current and torque.  Both relationships are separate from each other but below you can see how they are used together to provide a system to…

Learn More

KSh1,000.00

  • Availability: 0 in stock
Quick View
DC Motor 12v/100rpm

KSh1,100.00

DC Motor 12v/100rpm .

Product Name: 100 RPM DC Geared Motor Rated Power: DC 12V 40-50mA ( no load ) Shaft Diameter: 4mm/ 0.16″ Overall Size: 25 x 70mm/ 1″ x 2.76″ (D*H)

Learn More

KSh1,100.00

  • Availability: 0 in stock
Quick View
GSM/GPRS SIM 900

KSh5,500.00

GSM/GPRS SIM 900 .

The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods: Short Message Service Audio GPRS Service The GPRS Shield is compatible with all boards which have the same form factor (and…

Learn More

KSh5,500.00

  • Availability: 0 in stock
Quick View
L293D IC(Motor Driver) .

L293D is a dual motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors. L293D contains two inbuilt H-bridge driver circuits. In its common mode of operation, two DC motors can be…

Learn More

KSh300.00

  • Availability: 0 in stock
Quick View
Featured!
L293D Motor Driver(Shield) .

L293D Motor Drive Shield is a monolithic integrated, high voltage, high current, 4-channel driver. Basically this means using this chip you can use DC motors and power supplies of up to 25 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also…

Learn More

KSh1,100.00

  • Availability: 0 in stock
Quick View
L298N IC (H-Bridge Motor) .

The L298N is a dual H-Bridge motor driver which allows speed and direction control of two DC motors at the same time. The module can drive DC motors that have voltages between 5 and 35V, with a peak current up to 2A.

Learn More

KSh500.00

  • Availability: 0 in stock
Quick View
Motor Driver L298N(Dual H bridge) .

The L298 Motor driver H bridge can be used with motors that have a voltage of between 5 and 35V DC. With the module used in this tutorial, there is also an onboard 5V regulator, so if your supply voltage is up to 12V you can also source 5V from the board. Using L298N as…

Learn More

KSh600.00

  • Availability: 0 in stock
Quick View
NEMA 17 Stepper Motor(200Rev -12v 350ma) .

TECHNICAL DETAILS 200 steps per revolution, 1.8 degrees Coil #1: Red & Yellow wire pair. Coil #2 Green & Brown/Gray wire pair. Bipolar stepper, requires 2 full H-bridges! 4-wire, 8 inch leads 42mm/1.65″ square body 31mm/1.22″ square mounting holes, 3mm metric screws (M3) 5mm diameter drive shaft, 24mm long, with a machined flat 12V rated…

Learn More

KSh1,800.00

  • Availability: 0 in stock
Quick View
Servo Motor SG5010

KSh1,000.00

Servo Motor SG5010 .

DESCRIPTION This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box. Comes with 3 horns, as shown. They aren’t the…

Learn More

KSh1,000.00

  • Availability: 0 in stock
Quick View

Showing 1–12 of 16 results

Free WordPress Themes, Free Android Games