RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The integrated 2 way DC motor driver and Xbee socket allows you to start your project immediatly without the need for an additional motor driver or wireless shield.
Another improvement of Romeo V2 is that it supports stepper motor control.
The RoMeo V2 [R3] behaves like Arduino Leonardo based on the ATmega32u4 chip,You can program it directly from the Arduino IDE 1.0.1 or later version. Because of the ATmega32U4 as it’s sole microcontroller, RoMeo V2 is simple and easy to use. The 32U4 chipset handles the USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the very interesting USB-HID protocol! The best advantage is that ATmega32u4 has two serial ports which allows uploading sketches without removing wireless modules. Debuging is no longer a painful task.
Romeo V2 also improves the power supply, it has now a switch to select power source either from USB or external power.
Romeo V2.2 redesigns the power supply system to improve the stability of the ADC circuit.
Wide operating input voltage
Directly support Xbee and XBee form factor wifi, bluetooth and RF modules
ON/ OFF switch to control the system power from external motor power
3 Digital I/O extensions (D14-D16)
S1 – S5 switch replace jump cap, allows free use for the GPIO.
Micro USB instead of A-B USB connector
Analog sensor extension port: Orange for Signal, Red for Vcc, Black for GND
Note:The analog sensor port pin mapping on RoMeo v2 is different from the old version. Please select Arduino Leonardo board when using Arduino IDE.
DC Supply: USB Powered or External 6V ~ 23V DC
DC Output: 5V(2A) / 3.3V DC
Motor driver Continuous Output Current: 2A
Bootloader: Arduino Leonardo
Compatible with the Arduino R3 pin mapping
Analog Inputs: A0-A5, A6 – A11 (on digital pins 4, 6, 8, 9, 10, and 12)
PWM: 3, 5, 6, 9, 10, 11, and 13. Provide 8-bit PWM output
5 key inputs for testing
Auto sensing/switching external power input
Support Male and Female Pin Header
Built-in Xbee socket
Integrated sockets for APC220 RF Module and DF-Bluetooth Module
Three I2C/TWI Interface Pin Sets (two 90°pin headers)
Two way Motor Driver with 2A maximum current
One Stepper Motor Drive with 2A maximum current
Size: 89 x 84 x 14mm (3.50 x 3.31 x 0.55″)
This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for most purposes 1/16 is a…Learn More
L293D Motor Drive Shield is a monolithic integrated, high voltage, high current, 4-channel driver. Basically this means using this chip you can use DC motors and power supplies of up to 25 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also…Learn More
DESCRIPTION USB 11N nano wifi dongle will get your Raspberry Pi hooked up to the internet wirelessly within seconds! The unit uses the plug and play Ralink RT5370 Chipset, which requires no set up or installation on Raspian, XBMC or OpenElec, and features an integrated micro antenna to give you clear and constant WiFi signal….Learn More
For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only – MXL belts will slip due to the different tooth profile. This pulley has 20 teeth, and a 5mm inner bore. Two set screws can be used to…Learn More
Onboard 5v->3v regulator provides 150mA for power-hungry cards 3v level shifting means you can use this with ease on either 3v or 5v systems Uses a proper level shifting chip, not resistors: less problems, and faster read/write access Use 3 or 4 digital pins to read and write 2Gb+ of storage! Activity LED lights up…Learn More
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the Internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. It supports up to eight simultaneous socket connections. Use the Ethernet library to write sketches that connect to…Learn More
This weight sensor (load cell) is suitable for electronic balance and other high accuracy electronic weighing devices. Specifications Rated load: 5 Kg Output: 1mv / v Temperature zero drift: 0.1% F.S Output sensitivity: ± 0.15mv / v Temperature sensitivity: 0.05% F.S Excitation voltage: 5-10VDCLearn More
The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version.Learn More
The MPU-6050™ parts are the world’s first MotionTracking devices designed for the low power, low cost, and high-performance requirements of smartphones, tablets and wearable sensors. The MPU-6050 incorporates InvenSense’s MotionFusion™ and run-time calibration firmware that enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices in motion-enabled products,…Learn More
Sensitive material of MQ-2 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensor’s conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, Convert change of conductivity to correspond output signal of gas concentration. MQ-2 gas sensor has high sensitity to…Learn More